anb_utils 2.3
anb_utils is our powerful utility program designed to seamlessly interface with your ANB sensor. With anb_utils, you can access the full range of sensor functions, adjust measurement settings, and view real-time data. It also allows you to download CSV files for detailed analysis, backup data to the cloud, and ensure smooth operation for all your water quality monitoring needs.
Download the latest anb_utils and unzip to it's own directory
Ensure you extract the executable to its own directory. Do not run the executable directly from the zip file, as this may cause issues during operation.
2025-03-10 17:02:16 Starting anb_utils Command Line Utility V2.3
Copyright ANB Sensors Ltd. 2025
Select a serial port to connect to the Sensor:
1 COM3
2 COM4
3 COM5
4 COM6
Enter Port [1-4]:
Connecting to Serial Port: COM5 Baud Rate 57600
PCB Version: STM / IB
Sensor Type: AQ50
Serial Number: 300239
Current Interface Firmware Version: IB_10.8 Latest Firmware installed!
Current Driver Firmware Version: STM_10.8 Latest Firmware installed!
Current Status: Idle
Main Menu - What would you like to do?
1 Measurement Settings
2 Install new Firmware
3 Command Line Prompt
4 Download CSV Data from Sensor
5 Backup CSV Data to ANB Cloud
Enter your choice:
Keep an eye on the message next to the firmware version, which will notify you if a new firmware update is available for installation!
When using anb_utils, a Log folder will be created in the same directory as your anb_utils executable. This contains a text file associated with the COM port, which logs all output from the sensor. A Data folder is also created if any csv files are downloaded from the sensor.
If your sensor is not powered when you select your serial port, or the wrong serial port is selected, the following message will be given:
Cannot get Full Sensor output.... Is sensor Turned off? Is Firmware installed?
Press Enter to continue or ctrl-c to quit
Repower your sensor and restart anb_utils